1000kg Ramp pair (2500mm x 260mm)Suitable for machinery, vehicles and equipmentLoad depends on axle distance. The axle distance is between the front and rear wheels.Load applies to 2-axle vehicle and 1 set of ramps. Distribution of weight with a maximum of 2/3 on one axle. The axle with the highest load must always be at the top of the ramp when driving up and down. REMEMBER to include the weight of the driver, fuel, equipment etc Ramps must NEVER be used as a bridge/plank, i.e. without an approach angleFor load/drive-up, please see specifications.https://a2beuroparts.com.au/wp-content/uploads/2023/06/Loadcap.mp4 Safety measures:Always wear gloves when handling the rampsOnly use the ramps on stable and firm groundPersons other than the user must keep an appropriate distance during useDriving up and down the ramps may only be done under the supervision of another person.Never use the ramps if there is visible damageThe ramps must rest on the trailer with the entire installation surfaceThe ramps must be attached to the trailer with bolts or similar.Maximum permitted wheel width is ramp width minus 20 mm
