PCA9685 TB6612 DC Motor Stepper Motor Driver Board

PCA9685 TB6612 Stepper Motor Driver Board This is DC Motor Stepper FeatherWing, which will let you use 2 x bipolar stepper motors or 4 x brushed DC motors (or 1 stepper motor and 2 DC motors). Feature: 4 full H-bridges: Each bridge of the TB6612 chipset provides 1.2A (3A peak), with thermal shutdown protection, and internal kickback protection diodes. It is possible to run a 4.5VDC motor to 13.5VDC. Up to 4 bi-directional DC motors with separate 12-bit speed selection (about 0.02% resolution) Up to 2 stepper motors (unipolar or bipolar), single coil, dual coil, staggered or micro-stepped. Motor is automatically disabled when powered on Large 3.5mm terminal block connector for easy connection of wires (18-26AWG) and power Polarity protected 2-pin terminal block and jumper for external power supply for separate logic / motor power Fully stackable design: 5 address selection jumper pads mean up to 32 stackable wings: this is 64 stepper motors or 128 DC motors. Note: Due to manual measurement, please allow 1-3mm different. Due to different displays and different lighting, the image may not reflect the actual colors of the project. Thank you for your understanding.